Synergy 2160
PodFlow3 user guide
PodFlow3 tutorial
PodFlow3 Programming tool.
PodDownload Tool for downloading configurations
Pod Bootstrap Tool to update Synergy 2160 firmware
Firmware Current firmware for Synergy 2160 main micro
Firmware Current firmware for Synergy 2160 IR micro
Synergy 2160 Connect Connection Info
Synergy 2160 - 16 button controller mounted on a UK 2 gang white metal panel.
Ideal
for basic control of projectors, LED displays and other devices via RS232, IR or
both.
Two bi-directional RS232 ports give control over projectors, displays and other RS232 devices.
Two IR ports supporting emitters for control of devices such as video players, receivers and amplifiers.
Two inputs, one which can be used with an external PIR sensor for room occupancy sensing, the second can be used to either lock the panel or power off the system. Both can also be used as an extra button input which can operate independently from or in parallel with a main panel button.
Two outputs can be configured to control motorised screens*, control projector lifts*, control projector power switching or be controlled independently by any button including timed functions or as indication of external buttons.
Will fit a standard depth UK back box and is provided with fixed screw terminals for ease of installation.
* requires SPC-PP1
Push Buttons:
RS232 serial ports:
IR Outputs:
Outputs:
Digital input:
Connector:
Power:
Size:
16 with internal Green Led and can be user labelled.
2 x Bidirectional, Baud rates 2400, 4800, 9600, 19200, 38400,
Parity None, even or odd.
2 x each supporting 2 emitters and allows multiple device sequences.
2 x Open collector, 50mA max, 12V max, Fitted with ‘recirc’ diodes
2 x Maximum input voltage 5V D.C & fitted with 10K Ohm pull-up resistor to 5V.
2 x 10 way 5mm pitch screw terminals.
12V DC @ 210mA Max + external relay current, 12V, 300mA power supply included.
146mm x 86mm x 30mm deep ( 44mm back box recommended). Nett weight = 220g
24 x RS232 input messages each up to 32 bytes long.
64 x RS232 output messages each up to 32 bytes long.
32 x Infra-red output sequences each of up to 127 steps plus delays.
64 x PodNet messages IN [with optional PodNet add-on].
64 x PodNet messages OUT [with optional PodNet add-on].
8 x Timers, each configurable for 6 modes.
16 x Flip-Flops, configurable in 3 modes.
16 x Logic Gates each with 4 inputs.
The Synergy 2160 is a 16 button controller mounted on a UK 2 gang white metal panel. Ideal for control of projectors & LED displays other devices via RS232, IR or both.
The Synergy 2160 may be programmed to access any available RS232 commands such as on, off, input select and volume, and with multifunction buttons one press can establish a series of events for seamless operation and timed events such as projector shut down.
It has two infrared outputs to control peripheral equipment.
Two outputs are also provided for control of external relays or indicators for screen control etc. It also has two external inputs for use with an external switch or a PIR detector for additional control functions or shutdown.
With the additional EtherLink 232, this unit can link direct into a Ethernet backbone. This will give control of multiple other devices as well as control of the Synergy 2160 over Ethernet via your LAN / WAN network or even over the Internet.
Power supply included. UK supplied normally or add "/EU" to order code for European supply.
Please Note: This unit is programmed using the Podflow 3 software and not the Synergy software
This unit can be upgraded at time of order to use the Podnet protocol. This will allow the Synergy 2160 to connect to other Podule control units. It can also be upgraded on order to include an onboard EtherLink 232 that operates in parallel with RS232 port 2.
Control |
Audio/Video |
Connectivity |
Support |
About |
iKON PRO |
Display Control |
Advanced Control |
SPC 4 |
SPC 6 |
SPC 7 |
SPC-PP1 |
Synergy |
Octo Podule |
SPC-PP1 |
Buttons operation |
Syn-Link port |
Synergy 1040 |
Synergy 1080 |
Synergy 2080 |
Synergy 2160 |
SPC-PP1 |
Synergy operation |
Synergy E2083 |
Panel upgrading |
Buttons operation |
Syn-Link port |
SGA-40 |
HPA-82 |
Euro Plates |
Ikon PRO Adapters |
Euro 25mm Wide |
Euro 50mm Wide |
UK frames |
Desk Modules |
EP-A25 |
EP-V25 |
EP-PC25 |
EP-GC25 |
EP-USB25 |
EP-SPK25 |
EP-RJ45B |
EP-25-BLANK |
EP-A25B |
EP-LVC-25 |
EP-LVC-25-W |
EP-PC50 |
EP-PC50-ST |
EP-PC50V |
EP-PC50V-ST |
EP-PC50J |
EP-PC50J-ST |
EP-HDMI50-90 |
EP-HDMI50-ST |
EP-HDMI50 |
EP-DVI50-ST |
EP-XLR50-3M |
EP-XLR50-3F |
EP-13AB |
EP-50-BLANK |
EP-LVC-51 |
EP-LVC-51-W |
EP-50FW |
EP-50FSC |
EP-50FC |
EP-50FSB |
EP-100FW |
Contact Support |
Configuration tools |
Documentation |
Firmware |
How to guides |
About |
Contact us |
Why Choose iKON |
Delivery Policy |
Returns Policy |
Warranty & Repairs |
RoHS & WEEE |
Request Pricelist |
Ethernet |
Modules |
Resources |
iKON AVS |
Adapters |
Synergy E2083 |
EtherLink 232 |
EtherLink Lite |
EtherPower 80 |
MTX-A88 |
DM-232 |
DM-485 |
DM-Balance |
DM-Serial |
How to guides |
Images |
OEM |
Whitepapers |
Manuals |
PodFlow Software |
Podules |
Other PRO |
USB-ST |
RJ45-ST |
HDMIs |
X3 XLR adapters |
DADO-OEM |
FBA-1 |
LVC-25 |
LVC-51 |
Display Control |
Advanced Control |
SPC 4 |
SPC 6 |
SPC 7 |
SPC-PP1 |
Synergy |
Octo Podule |
SPC-PP1 |
Buttons operation |
Syn-Link port |
Synergy 1040 |
Synergy 1080 |
Synergy 2080 |
Synergy 2160 |
SPC-PP1 |
Synergy operation |
Synergy E2083 |
Panel upgrading |
Buttons operation |
Syn-Link port |
Synergy |
Octo Podule |
SPC-PP1 |
Buttons operation |
Syn-Link port |
Synergy 1040 |
Synergy 1080 |
Synergy 2080 |
Synergy 2160 |
SPC-PP1 |
Synergy operation |
Synergy E2083 |
Panel upgrading |
Buttons operation |
Syn-Link port |
Synergy 1040 |
Synergy 1080 |
Synergy 2080 |
Synergy 2160 |
SPC-PP1 |
Synergy operation |
Synergy E2083 |
Panel upgrading |
Buttons operation |
Syn-Link port |