The iKON AVS DAI mk4 is a fibre-optic audio distribution system for critical systems. It uses dual, continuously monitored redundant fibre rings. If a fault is discovered the signal path is automatically rerouted through the remaining operation fibres.
Inputs and outputs are balanced line level. The control port supports selective paging and channel routing as well as allowing the connection of a single RS232/RS422/RS485 data channel with a maximum baud rate of 38,400 carried transparently over the same network as the audio.
We also supply accessories
HDMI cable from just £3.02/m*
Back boxes. E.g. Drywall 35mm deep for Dado-1G panels. From £1.75 each*
* Prices exclude VAT and delivery. Minimum quantities may apply.
To provide fast and convenient access to our catalogues you now have the choice of access through the iKON AVS web site or via this link http://www.issuu.com/iKONavs
Please note that newer products may not be featured so please request our individual Product Sheets
Welcome to the iKON AVS newsletter keeping you up to date with the latest developments and new products.
iKON AVS have been manufacturing innovative AV control and connectivity products since 2002. An independent UK owned company we pride ourselves in offering high quality, innovative and award winning products with excellent pre and post sales service
Audio Controller joins Synergy Range
iKON's Synergy control panels offer extensive onboard facilities along with easy programming and simple upgrade options.
The AU4 is a serial controlled four input audio switcher and volume control. It also provides a microphone input, which is mixed with the program audio.
The AU4 audio controller is available in two versions:
AU4L provides line level outputs on RCA sockets
AU4P as the AU4L but also incorporates a 20 watt per channel amplifier.
The microphone input has a selectable hi-pass filter. It also has its own level control and EQ. The microphone is mixed with the program audio after the remote volume facility and the microphone can be turned on and off either remotely via the Synergy panel, or using a push buton connected to terminals on the AU4 audio controller.
When an input is selected the volume can be adjusted with any change stored against the input. Dip switches on the rear of the unit allow either full range (+15 to –48dB ) or limited range (+15dB to –15dB), The default level can also be set as fixed (0dB), or retaining the last setting.
The AU4 is designed to operate in conjunction with either the Synergy or SPC controllers but can also be used as a stand-alone RS232 controlled audio system.
Design and Support Packs launch at x-Solutions
Why not come along to x-Solutions on 19th and 20th October to see the latest products from iKON AVS and find out about our innovative new Design and Support Packs.
Also benefit from eighteen years practical experience of designing and implementing critical control systems during the seminar 'When control failure is just not an option' presented by our MD, David Tyas.
Pre-register for free, fast-track entry to the show. http://www.x-solutions.co.uk
More juicy bits! – critical audio distribution solution
The iKON AVS DAI mk4 is a fibre-optic audio distribution system for critical systems.