3-pin female XLR terminated on screw terminals for solderless installations.

Using a Neutrik B series XLR this will fit a panel
of no more than 3mm in thickness due to it being rear mounting.
A panel cut-out of 22mm diameter will be required and it has 2.5mm diameter fixing holes.
The screw terminal is marked with the XLR pinout.

3-pin male XLR terminated on screw terminals for solderless installations.

Using a Neutrik B series XLR this will fit a panel
of no more than 3mm in thickness due to it being rear mounting.
A panel cut-out of 22mm diameter will be required and it has 2.5mm diameter fixing holes.
The screw terminal is marked with the XLR pinout.