Ideal for projectors, plasma and TFT screen control in place of handsets. The Wall 8 may be programmed to access any available RS232 commands such as on, off, input select and volume, and with multifunction buttons one press can establish a series of events for seamless operation and timed events such as projector shut down.

Top Features Specification Downloads

Features

4, 6 or 8 buttons each with LED indication
Available in Stainless Steel or White
UK single gang size
Range of engraved buttons available in silver or ivory. Click Here to see
Stainless steel panels can be provided with custom engraving .
Bi-directional RS232 Port
PodNet for easy system expansion
Custom engraving available

Specification

Hardware devices
        8 x Push Buttons
        8 x Green LED's  
        1 x Bi-directional RS232 Port
        1 x PodNet I/O Port on RJ45

Software devices
        8 x Timers
      16 x Logic Gates
      16 x Flip-Flops
      24 x RS232 input messages
      32 x RS232 output messages
      32 x PodNet   input messages
      32 x PodNet   output messages

Power requirements ( directly powered or via PodNet ) 24V DC @  120mA max.
Overall size = 85mm x 85mm
Required depth  =  25mm, ( 44mm back box recommended )
Net weight = 110g

Downloads

PodFlow3               Programming tool.
PodDownload         Tool for downloading configurations
Pod Bootstrap        Tool to update Podule firmware
Firmware                Current firmware for Wall 8 Podule
Manual                   Podule Manual
Leaflet                    Sales literature
Programs                Fully operational demo programs
Ready to Roll          Series of pre-configured programs for common projectors.

Top Features Specification Downloads