Push Buttons

RS232 serial port:

Ethernet Port:

Outputs:

Input:          

Connector:

Power:

Size:    

Eight with internal Green Led and can be user labelled.

Bidirectional, Baudrates  9600, 19200, 38400, 57600, 115200  

Parity None, even or odd

10/100 auto detect, TCP or UTP, Supports auto MD/MDIX.

2 x Open collector,  50mA max, 12V max, Fitted with ‘recirc’ diodes

Screen raise/lower periods 1 to 255 minutes

2 with a maximum input voltage of 5V D.C & fitted with 10K Ohm pull-up resistor to 5V.

When used for room occupancy detection, port 1 offers:

             PIR output 0V min. to 5V max. or open collector,

              Output can be either low or high (on or off) for motion detected.

             Room empty period detection can be 1 to 255 minutes

10 way & 8 way 3.5mm pitch detachable screw terminals.

12V DC @ 210mA  Max + external relay current, 12V, 300mA power supply included.

146mm x 86mm x 30mm deep  ( 44mm back box recommended). Nett weight = 220g

• A bi-directional RS232 port gives control over projectors, displays and other RS232 devices.
• Ethernet port for connection to LAN / Wan Network.
• Ethernet port can be used as a Client or Server utilising either TCP or UTP protocols.
• 10/100 auto detect interface.
• Supports auto MD/MDIX so can use a crossover or parallel cable.
• Two IR ports supporting emitters for control of devices such as video players, receivers and amplifiers.

• RS232 and IR commands can be loaded from the embedded libraries or user created files.
• Two inputs, one which can be used with an external PIR sensor for room occupancy sensing, the second can be used to either lock the panel or power off the system. Both can also be used as an extra button input which can operate independently from or in parallel with a main panel button.

• Two outputs can be configured to control motorised screens*, control projector lifts*, control projector power switching or be controlled independently by any button including timed functions or as  indication of external buttons.
• Will fit a standard depth UK back box and is provided with detachable screw terminals for ease of installation.

* requires SPC-PP1

The Synergy E2083 is an Ethernet enabled version of the Synergy 2080. It can be controlled over Ethernet via a LAN /WAN network or even the Internet.

Mounted on a UK 2 gang white metal panel, it is ideal for control of projectors, plasma and LCD's displays via, RS232, IR or both.

When connected to an Ethernet Backbone it will also give control of multiple other devices, in the same room or different rooms and locations.
(additional Etherlink 232 unit required)

RS232 and IR commands can be loaded from the embedded libraries or user created files.

Two outputs are provided for control of external relays or indicators for screen control etc. It also has two external inputs for use with an external switch or a PIR detector for additional control functions or shutdown.

The E2083 can be programmed using the quick and easy software using a simple menu structure with 'drag and drop' configurations along with both central and user created libraries for both RS232 and IR functions.

The Syn-Link port is used to link to the Ethernet module mounted on the rear of the unit.

Automatic button label generation and printing is included within the software.

Detachable screw terminals are used for all outgoing and power connections for ease of installation.

Power supply included. UK supplied normally or add "/EU" to order code for European supply.