Whilst mainly used for Screen, Curtain and Blind control via PodNet, the four configurable local inputs can be used with switches, PIR sensors, and time clocks etc.. The RS232 output is ideal for linking to a local projector or plasma screen and by using the Podules ultra flexible system architecture the local, RS232 and PodNet inputs can be configured with internal software controlled logic processing and routing to any combination of outputs both within the Podule and external via the PodNet BUSS.

The internal 15w power supply provides all the power necessary to run a small home cinema or lecture theatre Podule installation consisting typically of a WALL, CIR and SCREEN  Podule.

Top Features Specification Downloads

Features

Bi-directional RS232 Port
Analogue / digital inputs
Dual 4 Amp mains outputs
PodNet for easy system expansion
Built in system PSU
Rack mountable with Rack-1 kit or wall mount with WB-1.

Specification

Hardware devices
       1 x Bi-directional RS232 Port
       4 x Analogue / digital inputs
       2 x 240v, 4amp power relays with contact suppression
       2 x PodNet I/O Port on RJ45
       1 x 15watt Podule PSU

Software devices
        8 x Timers
      16 x Logic Gates
      16 x Flip-Flops
      24 x RS232 input messages
      32 x RS232 output messages
      32 x PodNet   input messages
      32 x PodNet   output messages  
       2 x Virtual digital pots with zero reset.
       4 x Analogue comparators

Power requirements = 110-240V AC. 15VA max ( excluding loads).
Overall size = 213mm x 44mm x 145mm
Net weight = 1,250g

Downloads

PodFlow3               Programming tool.
PodDownload         Tool for downloading configurations
Pod Bootstrap        Tool to update Podule firmware
Firmware                Current firmware
Manual                   Podule Manual
Leaflet                    Sales literature
Programs                Fully operational demo programs
Ready to Roll          Series of pre-configured programs for common projectors.

Top Features Specification Downloads