PodNet

Ikons propriety control network. It is based upon the CAN ( Control Area Network) protocol utilising its high level of interference rejection and the ability to continually re-synchronise all connected devices. It also carries 24V DC system power.

Messages are each given a number and whilst only one Podule should generate a message, multiple Podules can be assigned to receive it. Messages can contain Digital or Analogue values dependent upon the trigger used.

PodNet used RJ45 sockets allowing the use of pre-made Cat5 patch cords that are of the ‘straight’ format, that’s wired pin to pin with no crossover.

CAUTION 

DO NOT INTERCONNECT TO ETHERNET OR PERMANENT DAMAGE MAY OCCUR TO THE ETHERNET DEVICES.