Home Reliability through quality and simplicity
Telephone: +44(0)1299 250991
Email: sales@ikonavs.com
Home Products Connectivity
May also be of interest

Floor box panels

Back (history)
© 2016 Nebula Audio Ltd. All rights Reserved
May also be of interest
Enclosures
UK frames
Desk Modules

These quick and easy to install floor box panels have been designed to fit most Crabtree, Britmac and MK floor boxes.


They have been designed with a recess to make connecting easier and to have a flush finish when fitted. They all utilise the DADO-STA™ board which has a HD15 for VGA with a 3.5mm stereo jack for audio, both terminated in screw terminals. to eliminate the need to solder connections on site.


All pins are available with both pin numbers and RGBHV connections highlighted. All grounds are kept independent.

Part number
Size
AFB-66-P1
66 x 173
All angled floor box panel fitted with passive PC and Audio, and are 30mm deep so a depth of 35mm is recommended  
AFB-75-P1
75 x 175
AFB-87-P1
87 x 173
AFB-100-P1
101 x 175

The AFV-VK board which has video and audio phonos (RCA's) to screw terminals and can be added to any of our range of angled floor box panels.


(please note: the pictures show the add on board fitted to a floor box panel. The add on board does not come as standard and has to be ordered separately)

AFB range

EP-FBP50
175mm x 75mm floor box panel with 50mm Euro module aperture

EP-FBP100
175mm x 75mm floor box panel with 100mm Euro module aperture

FBP range
Floor plate service

Again if you can't see what you want contact our

custom floor plate service.

These quick and easy to install floor box panels have been designed to fit most Crabtree, Britmac and MK floor boxes.


They have been designed with a recess to make connecting easier and to have a flush finish when fitted. They all utilise the DADO-STA™ board which has a HD15 for VGA with a 3.5mm stereo jack for audio, both terminated in screw terminals. to eliminate the need to solder connections on site.


All pins are available with both pin numbers and RGBHV connections highlighted. All grounds are kept independent.

Part number
Size
AFB-66-HDMI
66 x 173
All angled floor box panel fitted with passive PC Audio and HDMI, and are of 40mm deep, so a depth of 45mm is recommended
AFB-75-HDMI
75 x 175
AFB-87-HDMI
87 x 173
AFB-100-HDMI
101 x 175

The floor box comes fitted with a HDMI-90BB adapter.

This comes fitted at 90 degrees to the top of the floor box, to allow fitting of pre-made cables.

This can be rotated through 90 and 180 degrees depending on the cable access needed.

The HDMI-BB or HDMI-ST adapter can also be fitted to these floor box panels if required.



AFB HDMI range