homesolutionsproductssupportcompanycontacts
One Gang Plates
Euro Plates
Stainless Steel Plates
Active Plates
WhiteBoard Plates
Custom Plates
Desk Access Enclosures
For use with the Ikon AVS Euro Panels and Euro Podules, this range of desk access modules enables their use in or on desks and cabinets. Three variations are currently available.
SDM-6H

SDM-6H

Desk mounting horizontal module with 150mm of available space for 6 x 25mm or 3 x 50mm Euro Panels. Select your requirements from our extensive range of Euro Panels to suit your application.

Constructed from an aluminium extrusion with moulded end covers, it is supplied complete with a 13A socket and a fixed 2m mains cable. ( Schuko, CEE7 and IEC alternatives available to order ). Cable entry can be from the rear or underneath.

It is only 110mm deep, 88 mm high and 364mm wide. Wider versions are available to order.

RDM-6V

RDM-6V

Slide out vertical tower that has 150mm of available space for 6 x 25mm or 3 x 50mm Euro Panels. Select your requirements from our extensive range of Euro Panels to suit your application.

Constructed from an aluminium extrusion with a moulded top cover, it is supplied complete with a 13A socket and a fixed 3m mains cable. ( Schuko, CEE7 and IEC alternatives available to order ).

For mounting, only a single 80mm diameter hole is required. Overall diameter is 104mm and the RDM-6V extends 215mm above the desk.

It is rated to IP54 when closed

 

RDM-6H

RDM-6H

Flip top horizontal Desk Access Module of the above supplied in a black and silver finish.

Constructed from an aluminium extrusion it has
150mm of available space for 6 x 25mm or 3 x 50mm Euro Panels. Select your requirements from our extensive range of Euro Panels to suit your application.

It is supplied complete with a 13A socket and a fixed 3m mains cable. ( Schuko, CEE7 and IEC alternatives available to order ).

For mounting only a 299mm x 132mm cut out is required.

Downloads


Leaflet                    Sales literature