To complement the HDMI-ST screw terminal adaptor Ikon provide HDMI cable. The cable can is provided in multiples of 5m upto a maximum length of 200m. When ordering replace the "x" suffix with the desired length. i.e. 20m cable will be HDMI-26/20. This cable is of a higher specification of the normal cable used in pre-made leads and will probably operate over longer length but the operation is dependant on the equipment used so it is recommended that tests are carried out before the cable is installed.
|
The cable may be to long or you may have needed to cut the BNCs off to get the cable down a conduit. All is not lost, just use the BNC-PL1 kit to re-terminate. |
The cable may be to long or you may have needed to cut the BNCs off to get the cable down a conduit. All is not lost, just use the BNC-PL1 kit to re-terminate. |
A kit of 5 strain relief boots (one each of Red, Green, Blue, White & Black) for use with BNC-PL1 when additional cable support is required or the appearance is important. |
