Comprehensive inputs and outputs are fitted allowing easy incorporation into new and existing systems. Ultra flexible system architecture allows inputs in any combination of the digital & analogue parallel, RS232 serial and PodNet inputs with internal software controlled logic processing and routing to any combination of outputs both within the Podule and external via the PodNet BUSS.

Top Features Specification Downloads

Features

Bi-directional RS232 Port
Analogue / digital inputs
Open collector outputs
Dual 0-10V analogue outputs
Low voltage relays
5 x IR outputs
PodNet for easy system expansion
Rack mountable with Rack-1 kit or wall mount with WB-1.

Specification

Hardware devices
       1 x Bi-directional RS232 Port
       8 x Analogue / digital inputs
       8 x Open collector outputs
       2 x 0-10V analogue outputs
       4 x Infra-red outputs
       1 x IR Blaster output
       2 x PodNet I/O Port on RJ45

Software devices
        8 x Timers
      16 x Logic Gates
      16 x Flip-Flops
      24 x RS232 input messages
      32 x RS232 output messages
      32 x PodNet   input messages
      32 x PodNet   output messages  
      32 x IR output messages each capable of 100+ commands
       2 x Virtual digital pots with zero reset.

Power requirements ( directly powered or via PodNet ) 24V DC @  160mA max.
Overall size = 213mm x 44mm x 145mm
Net weight = 1,150g

Downloads

PodFlow3               Programming tool.
PodDownload         Tool for downloading configurations
Pod Bootstrap        Tool to update Podule firmware
Firmware                Current firmware
Manual                   Podule Manual
Leaflet                    Sales literature
Programs                Fully operational demo programs
Ready to Roll          Series of pre-configured programs for common projectors.

Top Features Specification Downloads