rlogo
logo

 
 

homesolutionsproductssupportcompanycontacts
Floorbox Panels

 
 
These quick and easy to install floor box panels have been designed to fit most
Crabtree, Britmac and MK floor boxes.
They have been designed with a recess to make connecting easier and to have a flush finish when fitted, and all have screw terminals to eliminate the need to solder connections on site.
The floor box panels can be supplied with either passive or active VGA and Audio connectors.
There is also an add on screw terminal AV board for any of the floor box panels.
   
 
Passive Floor Box Panels
passive floor box panels

The passive version uses the DADO-STA adapter which has a HD15 for VGA with a 3.5mm stereo jack for audio, both terminated in screw terminals.
All pins are available with both pin numbers and RGBHV connections highlighted.
All grounds are kept independent.

They currently come in 2 sizes, 66mm X 173mm and 75mm X 175mm and require a depth of 35mm

The part numbers are as follows
AFB-66-P1
AFB-75-P1
66 x 173 angled floor box panel fitted with passive PC and Audio.
75 x 175 angled floor box panel fitted with passive PC and Audio.
   
     
 
Active Floor Box Panels
active floor box panels
The active version uses a new audio and VGA buffer, designed to fit into a floor box.
It has plug in screw terminal connections to make installing easier.
It has a HD15 VGA Connector to screw terminals for the VGA connection plus a 3.5mm jack socket to balanced output on screw terminals for the audio.
It also has an amber LED to indicate Power and a green LED to indicate when it has a active VGA signal.

The unit requires an external 12V power supply at 60mA. It is capable of driving signals 60m and has a 260MHz bandwidth.

They currently come in 2 sizes, 66mm X 173mm and 75mm X 175mm and require a depth of 35mm

The part numbers are as follows
AFB-66-B1
AFB-75-B1
66 x 173 angled floor box panel fitted with active Audio and VGA buffer.
75 x 175 angled floor box panel fitted with active Audio and VGA buffer.
   
   
AFV-VK
  
afv-vk
The add on screw terminal AV board has Video and Audio phonos (RCA's) to screw terminals and can be added to any of our range of angled floor box panels.
(please note: the pictures above show the add on board fitted to a floor box panel. The add on board does not come as standard and has to be ordered seperatly)